Synergistic effects of calcium silicate/zinc silicate dual compounds andin-situinterconnected pores on promoting bone regeneration of composite scaffolds.

Rapid bone regeneration in implants is important for successful transplantation. In this regard, we report the development of calcium silicate/zinc silicate (CS/ZS) dual-compound-incorporated calcium phosphate cement (CPC) scaffolds with a three-dimensional poly (lactic-co-glycolic acid) network that synergistically promote bone regeneration.In vitroresults demonstrated that the incorporation of CS/ZS dual compounds into the CPC significantly promoted the osteogenic differentiation of stem cells compared to the addition of CS or ZS alone. Moreover, the bone-regeneration efficacy of the composite scaffolds was validated by filling in femur condyle defects in rabbits, which showed that the scaffolds with CS and ZS possessed a great bone repair effect, as evidenced by more new bone formation and a faster scaffold biodegradation compared to the scaffold with CS alone.

Ga2O3 Bipolar Heterojunction-Based Optoelectronic Synapse Array with Visual Attention.

The human brain efficiently processes only a fraction of visual information, a phenomenon termed attentional control, resulting in energy savings and heightened adaptability. Translating this mechanism into artificial visual neurons holds promise for constructing energy-efficient, bioinspired visual systems. Here, we propose a self-rectifying artificial visual neuron (SEVN) based on a NiO/Ga2O3 bipolar heterojunction with attentional control on patterns with a target color. The device exhibits short-term potentiation (STP) with quantum point contact (QPC) traits at low bias and transitions to long-term potentiation (LTP) at high bias, particularly facilitated by electron capture in deep defects upon ultraviolet (UV) exposure. With the utilization of two wavelengths of light upon the target and interference part of CAPTCHA to simulate top-down attentional control, the recognition accuracy is enhanced from 74 to 84%. These findings have the potential to augment the visual capability of neuromorphic systems with implications for diverse applications, including cybersecurity, healthcare, and machine vision.

Monolayer Organic Crystals for Ultrahigh Performance Molecular Diodes.

Molecular diodes are of considerable interest for the increasing technical demands of device miniaturization. However, the molecular diode performance remains contact-limited, which represents a major challenge for the advancement of rectification ratio and conductance. Here, it is demonstrated that high-quality ultrathin organic semiconductors can be grown on several classes of metal substrates via solution-shearing epitaxy, with a well-controlled number of layers and monolayer single crystal over 1 mm. The crystals are atomically smooth and pinhole-free, providing a native interface for high-performance monolayer molecular diodes. As a result, the monolayer molecular diodes show record-high rectification ratio up to 5 × 108 , ideality factor close to unity, aggressive unit conductance over 103 S cm-2 , ultrahigh breakdown electric field, excellent electrical stability, and well-defined contact interface. Large-area monolayer molecular diode arrays with 100% yield and excellent uniformity in the diode metrics are further fabricated. These results suggest that monolayer molecular crystals have great potential to build reliable, high-performance molecular diodes and deeply understand their intrinsic electronic behavior.

Preparation of lithium-containing magnesium phosphate-based composite ceramics having high compressive strength, osteostimulation and proangiogenic effects.

Fairly high concentrations of magnesium and lithium are conducive to improving the osteogenic and angiogenic capacities. In the current study, lithium-containing magnesium phosphate-based ceramics (AMP/LMPGs) were prepared from amorphous magnesium phosphate (AMP) at a low sintering temperature (650 °C), and the lithium/magnesium-containing phosphate glasses (LMPGs) were utilized as sintering additives. During the sintering procedure of AMP/LMPGs, the AMP reacted with LMPGs, producing new compounds. The AMP/LMPGs displayed nano-size grains and plentiful micropores. The addition of LMPGs noticeably increased the porosity as well as compressive strength of the AMP/LMPGs ceramics. The AMP/LMPGs sustainedly released Mg, P and Li ions, forming Mg-rich ionic microenvironment, which ameliorated cellular proliferation, osteogenic differentiation and proangiogenic capacities. The AMP/LMPGs ceramics with considerably high compressive strength, osteostimulation and proangiogenic effects were expected to efficiently regenerate the bone defects.

Effects of Zinc and Strontium Doping on In Vitro Osteogenesis and Angiogenesis of Calcium Silicate/Calcium Phosphate Cement.

Based on multiple biological functions (mainly osteogenesis and angiogenesis) of bioactive ions, Zn/Sr-doped calcium silicate/calcium phosphate cements (Zn/Sr-CS/CPCs, including 10Zn-CS/CPC, 20Sr-CS/CPC, and 10Zn/20Sr-CS/CPC) were prepared by the addition of Zn and Sr dual active ions into CS/CPC to further accelerate its bone regeneration in this study. The physicochemical and biological properties of the Zn/Sr-CS/CPCs were systematically investigated. The results showed that the setting time was slightly prolonged, the compressive strength and porosity did not change much, and all groups maintained good injectability after the doping of Zn and Sr. Besides, the doping of Zn and Sr had little effect on the phase and microstructure of hydrated products of CS/CPC. The degradation rate of Zn/Sr-CS/CPCs decreased after doping with Zn and Sr. In mouse bone marrow mesenchymal stem cells (mBMSC) experiments, all Zn/Sr-CS/CPCs stimulated the viability, adhesion, proliferation, and alkaline phosphatase (ALP) activity together with osteogenesis-related genes (ALP, Runx2, Col-I, OCN, and OPN). The further addition of Zn and Sr played better and synergistic roles in in vitro osteogenesis. Thereinto, 10Zn/20Sr-CS/CPC manifested the optimum in vitro osteogenic performance. As for human umbilical vein endothelial cell (HUVEC) experiments, the incorporation of CS doped with Zn and Sr into CPC possessed good vascularization properties of proliferation, NO secretion, tube formation, and the expression of angiogenesis-related genes (VEGF, bFGF, and eNOS). In conclusion, the doping of Zn and Sr into CS/CPC could exhibit excellent osteogenesis and good angiogenesis potentials and 10Zn/20Sr-CS/CPC could be considered as a promising candidate in bone repair.

Microplastics in the Taiwan Strait and adjacent sea: Spatial variations and lateral transport.

This study investigates the distribution, structural properties, and potential impacts of oceanic processes on microplastics (MPs) in the Taiwan Strait (TWS) and surrounding seas. With an average of 174 particles/m3, the MP abundance in surface seawater ranged from 84 to 389 particles/m3. MP abundance ranged from 16 to 382 particles/kg in sediments, with a median of 121 particles/kg. Fragment and fiber were the two most frequently detected shapes. These MPs were found to be composed primarily of carbon and oxygen elements at 70-90% levels using energy-dispersive X-ray spectroscopy. Additionally, several examples had trace levels of metallic components. Black was the color that MPs saw the most often out of all the hues. The two main types of polymers are polyester and rayon, and their production is influenced by home sewage discharge and synthetic fiber production. The main routes of MP transport were land source input, riverine input, and oceanic currents. This study showed that salinity affects the distribution of MPs, with high-salinity seawater serving to saturate their presence. On the other hand, upwelling raises MP concentrations by bringing nutrients from the deep to the surface. Furthermore, it has been discovered that the dilution of the Pearl River plume increases the MP prevalence in the region. The South China Sea Warm Current had the highest lateral MPs transport flux (2.1 × 1014 particles/y), which was followed by the Taiwan Strait Current area (1.0 × 1014 particles/y) and the Guangdong coastal areas (8.6 × 1013 particles/y). In sediments, the MP prevalence was inversely correlated with particle size. Flocculation processes probably made it easier for MPs to travel down the water column and deposit themselves on the aquatic substrate. Although the relationship between MPs, total organic carbon, and total organic nitrogen was not correlated, a favorable trend showed that MPs may discreetly contribute to carbon storage in coastal sediment.

Can water dating trace the transport history of HCHs in the ocean?

Long-range atmospheric and oceanic transport play a crucial role in the accumulation of persistent organic pollutants (POPs), including hexachlorocyclohexanes (HCHs), in the Arctic Ocean. Herein, transient tracers, specifically chlorofluorocarbon-12 and sulfur hexafluoride, were used to determine the ventilation time of HCHs. Results revealed that dissolved HCHs can penetrate to a depth of ~500 m in the western Arctic Ocean, corresponding to water masses with a mean age of 45 ± 14 years. The average long-range transport time for α-HCH from initial atmospheric release to entering the western Arctic Ocean was estimated to be >30 ± 5 years, indicating continued moderate to high ecological risks from HCHs in the Arctic. This study demonstrates that transient tracers serve as effective water dating tools to elucidate the transport history of stable POPs in the ocean, contributing to a better understanding of their environmental characteristics and fate.

An avalanche-and-surge robust ultrawide-bandgap heterojunction for power electronics.

Avalanche and surge robustness involve fundamental carrier dynamics under high electric field and current density. They are also prerequisites of any power device to survive common overvoltage and overcurrent stresses in power electronics applications such as electric vehicles, electricity grids, and renewable energy processing. Despite tremendous efforts to develop the next-generation power devices using emerging ultra-wide bandgap semiconductors, the lack of effective bipolar doping has been a daunting obstacle for achieving the necessary robustness in these devices. Here we report avalanche and surge robustness in a heterojunction formed between the ultra-wide bandgap n-type gallium oxide and the wide-bandgap p-type nickel oxide. Under 1500 V reverse bias, impact ionization initiates in gallium oxide, and the staggered band alignment favors efficient hole removal, enabling a high avalanche current over 50 A. Under forward bias, bipolar conductivity modulation enables the junction to survive over 50 A surge current. Moreover, the asymmetric carrier lifetime makes the high-level carrier injection dominant in nickel oxide, enabling a fast reverse recovery within 15 ns. This heterojunction breaks the fundamental trade-off between robustness and switching speed in conventional homojunctions and removes a key hurdle to advance ultra-wide bandgap semiconductor devices for power industrial applications.

A novel anti-washout curing solution of calcium phosphate cement prepared via irradiation polymerization.

The anti-washout ability of calcium phosphate cement (CPC) determines its effectiveness in clinical application. In the current research, the common method for improving the anti-washout ability of CPC is to add anti-washout polymer agents. Sodium polyacrylate powder is an excellent anti-washout agent but when bonded with CPC it basically degrades the anti-washout performance of CPC after γ-ray irradiation, and is widely used in the sterilization process of CPC products. Therefore, we propose a method for the preparation of a sodium polyacrylate solution through irradiation polymerization as curing solution for CPC. This method first uses γ-ray irradiation sterilization to improve the anti-washout ability of CPC directly. It not only avoids the adverse effects of γ-rays on anti-washout agents, but also the CPC blended using this sodium polyacrylate solution had good biological properties and injectability. It provides a new method for promoting the anti-washout properties of calcium phosphate cement, which is of great significance for expanding the clinical application of CPC.

Physicochemical properties and cytocompatibility of radiation-resistant and anti-washout calcium phosphate cement by introducing artemisia sphaerocephala krasch gum.

The anti-washout ability of calcium phosphate cement (CPC) determines the effectiveness of CPC in clinical application. The γ-ray irradiation method often used in the sterilization process of CPC products is easy to degrade some commonly polymer anti-washout agent, which greatly reduces its anti-washout performance. Artemisia sphaerocephala Krasch gum (ASKG) has the potential of radiation resistance and anti-washout, but no one has considered its performance as anti-washout agent of CPC and mechanism of radiation resistance and anti-washout so far. In this study, we report the effect of γ-ray on ASKG and the effectiveness of ASKG for enhancing of radiation resistance and anti-washout ability of CPC, the physical, chemical properties and in vitro cell behaviors of ASKG-CPCs were also investigated. The results showed that addition of ASKG before and after irradiation could significantly enhanced the anti-washout performance of CPC, which is differ from conventional anti-washout agents. Meanwhile, ASKG-CPCs had an excellent injectable property and biocompatibility, and low content of irradiated ASKG could promote bone differentiation well. We anticipate that the radiation-resistant and anti-washout ASKG-CPCs have potential application prospect in orthopaedic surgery.

High-responsivity dual-band ultraviolet photodetector based on Ga2O3/GaN heterostructure.

Ultraviolet photodetectors have aroused wide concern based on wide-band-gap semiconductors, such as GaN and Ga2O3. Exploiting multi-spectral detection provides unparalleled driving force and direction for high-precision ultraviolet detection. Here we demonstrate an optimized design strategy of Ga2O3/GaN heterostructure bi-color ultraviolet photodetector, which presents extremely high responsivity and UV-to-visible rejection ratio. The electric field distribution of optical absorption region was profitably modified by optimizing heterostructure doping concentration and thickness ratio, thus further facilitating the separation and transport of photogenerated carriers. Meanwhile, the modulation of Ga2O3/GaN heterostructure band offset leads to the fluent transport of electrons and the blocking of holes, thereby enhancing the photoconductive gain of the device. Eventually, the Ga2O3/GaN heterostructure photodetector successfully realizes dual-band ultraviolet detection and achieves high responsivity of 892/950 A/W at the wavelength of 254/365 nm, respectively. Moreover, UV-to-visible rejection ratio of the optimized device also keeps at a high level (∼103) while exhibiting dual-band characteristic. The proposed optimization scheme is anticipated to provide significant guidance for the reasonable device fabrication and design on multi-spectral detection.

Upwelling impact and lateral transport of dissolved PAHs in the Taiwan Strait and adjacent South China Sea.

The spatial distribution and depth profile of dissolved polycyclic aromatic hydrocarbons (PAHs) were investigated in the western Taiwan Strait (TWS) and northeastern South China Sea (SCS) during the southwest monsoon for a comprehensive study of spatial distribution, potential sources, upwelling, and lateral PAHs transport flux to assess the impacts of oceanic processes. The concentrations of ∑14PAHs were 33 ± 14 ng L-1 and 23 ± 11 ng L-1 in western TWS and northeastern SCS, respectively. A minor difference in potential sources in different areas was shown in principle component analysis results, which illustrated mixed sources (petrogenic and pyrogenic) in western TWS and petrogenic sources in northeastern SCS. An "enrichment in surface or deep but depletion in medium water" distribution pattern of PAHs depth profile during summertime was observed in Taiwan Bank, which was potentially influenced by the upwelling. The greatest lateral ∑14PAHs transport flux was found along the Taiwan Strait Current area (43.51 g s-1), followed by those along South China Sea Warm Current and Guangdong Coastal Current areas. Though the oceanic response to PAHs varied relatively slowly, the ocean current was a less-dominant pathway for PAHs exchange between the SCS and the East China Sea (ECS).

Enhanced bioactivity and hydrothermal aging resistance of Y-TZP ceramics for dental implant.

Although yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) ceramics have been widely used as restorative materials due to their high mechanical strength, unique esthetic effect, and good biocompatibility, their general application to implant materials is still limited by their biological inertness and hydrothermal aging phenomenon. Existing studies have attempted to investigate how to enhance the bioactivity or hydrothermal aging resistance of Y-TZP. Still, more studies need to be done on the modification that combines these two aspects. In this study, Y-TZP was prepared by 77S bioactive glass (BG) sol and akermanite (AKT) sol infiltration and microwave sintering, which provided Y-TZP with high bioactivity while maintaining resistance to hydrothermal aging. Results of phase composition evaluation, microstructural characteristics, and mechanical property tests showed that modified Y-TZP specimens exhibited little or no tetragonal-to-monoclinic (t → m) transformation and maintained relatively high mechanical properties after accelerated hydrothermal aging treatment. The in vitro biological behaviors showed that the introduction of 77S BG and AKT significantly promoted cell adhesion, spreading, viability, and proliferation on the surface of modified Y-TZP ceramics. Therefore, this modification could effectively enhance the bioactivity and hydrothermal aging resistance of Y-TZP ceramics for its application in dental implant materials.

Improving the osseointegration and soft tissue sealing of zirconia ceramics by the incorporation of akermanite via sol infiltration for dental implants.

Zirconia ceramics are promising dental implant materials due to their high-grade biocompatibility, high mechanical strength, and distinctive aesthetic appearance. Nevertheless, zirconia ceramics are bio-inert with a lack of osseointegration and soft tissue sealing, which limits dental implant applications. As such, the fabrication of zirconia ceramics with high mechanical strength, excellent osseointegration and soft tissue sealing performance remains a great challenge in the dental restoration field. In this article, a novel zirconia ceramic with akermanite (AKT) modification by the negative pressure infiltration method is presented. The effects of AKT sol infiltration at different times on the morphology, phase composition, mechanical properties, bioactivity, osseointegration and soft tissue sealing of the modified zirconia ceramics have been systematically investigated. The modified zirconia ceramics feature excellent mechanical properties and significantly improved surface roughness, hydrophilia, and apatite mineralization ability as compared with unmodified zirconia ceramics. Furthermore, cell-culture experiment results indicated that the surface modification of zirconia ceramics could promote adhesion, spreading, migration, proliferation and osteogenic differentiation of mouse bone marrow stromal stem cells (mBMSCs), as well as the early adhesion, spreading, proliferation and fibroblast differentiation of human gingival fibroblasts (HGFs) in vitro. The prepared bioactive zirconia distinctively enhanced the alkaline phosphate (ALP) activity, osteogenesis-related gene expression of mBMSCs and fibroblast-related-gene expression of HGFs. The in vivo evaluation confirmed that 15-TZP ceramics could promote bone-implant osseointegration to the greatest extent as compared with pure zirconia ceramics. To conclude, our research has shown that AKT-modified zirconia ceramics can achieve bone integration and soft tissue sealing, indicating that they have a lot of potential for application as a novel dental implant material in the clinical setting.

Synthesis, Characterization, In Vitro Cytological Responses, and In Vivo Bone Regeneration Effects of Low-Crystalline Nanocarbonated Hydroxyapatite.

Hydroxyapatite (HA) has been commonly used as an alternative bone substitute. But it has drawbacks, such as poor degradation and limited osteogenesis. Low-crystalline carbonated hydroxyapatite (L-CHA), which has greater biodegradability than HA, is suggested as one of the main components of bone minerals, but the exact mechanism behind the roles of carbonate substituted in biological behaviors of low-crystalline HA is still a mystery. In this study, L-CHAs with different carbonate contents were prepared, and the effects of the content on the physicochemical properties, in vitro cytological responses, and in vivo bone defects repair effects of L-CHAs were investigated. The results demonstrated that CO32- had successfully entered the lattice structure of L-CHAs with a maximum content of 9.2 wt %. Both low-crystalline undoped HA (L-HA) and L-CHAs were nanocrystalline (20-30 nm) with significantly higher specific surface areas, protein adsorption capacities, and biodegradability compared to high-crystalline HA (H-HA) with submicron crystalline size (200-400 nm). Besides, the amounts of the adsorbed protein and released Ca2+ ions increased in a carbonate-content-dependent manner. Compared to L-HA and H-HA, L-CHAs promoted the adhesion and proliferation of bone marrow mesenchymal stem cells and significantly upregulated the levels of alkaline phosphatase (ALP) activity and the expression of osteogenesis-related genes. In addition, L-CHA-9 not only showed a faster biodegradation rate but also effectively promoted bone regeneration when implanted in the critical-sized bone defects of rabbit femora. This study provided evidence for the development of L-CHA as a promising biodegradable and bioactive material with great osteoconductivity and osteogenic capability with respect to conventional HA.

Enhanced light output from deep ultraviolet light-emitting diodes enabled by high-order modes on a photonic crystal surface.

The authors demonstrate the enhanced light output from 275-nm AlGaN-based deep ultraviolet (DUV) light-emitting diode (LED) structures via the in-plane modulation of shallow photonic crystal (PC) patterns that were fabricated on the p-AlGaN contact layer surface. The employed PC lattice constants are in the range of 270-780 nm, much larger than the fundamental Bragg order lattice constant (∼95 nm). As compared to the unpatterned sample, the intensity of the top (or bottom) emission can be enhanced by up to 331% (or 246%), attributed to the high-order coherent diffraction of the internal trapped light and also the Purcell enhancement of spontaneous emission. The findings in this Letter suggest an easier way for the realization of more energy-efficient DUV LEDs which offer the advantage of high emission for various applications in disinfection and sterilization.

Enhanced osteogenesis and angiogenesis of biphasic calcium phosphate scaffold by synergistic effect of silk fibroin coating and zinc doping.

Biphasic calcium phosphate (BCP) scaffold has been widely applied to bone regeneration because of its good biocompatibility and bone conduction property. However, the low mechanical strength and the lack of angiogenic and osteogenic induction properties have restricted its application in bone tissue regeneration. In this study, we combined zinc (Zn2+) doping and silk fibroin (SF) coating with expectation to enhance compressive strength, osteogenesis and angiogenesis of BCP scaffolds. The phase composition, morphology, porosity, compressive strength, in vitro degradation and cell behaviors were investigated systematically. Results showed that the scaffold coated with SF exhibited almost 3 times of compressive strength without compromising its porosity compared with the uncoated scaffold. Zn2+ doping and SF coating synergistically enhanced the alkaline phosphatase activity and osteogenesis-related genes expression of mouse bone mesenchymal stem cells (mBMSCs). Furthermore, SF coating notably improved the proliferation, cell viability and in vitro angiogenesis of human umbilical vein endothelial cells (HUVECs). This work provides a novel way to modify BCP scaffolds simultaneously with enhancing mechanical strength and biological properties.

A comparative study of interfacial thermal conductance between metal and semiconductor.

To understand and control thermal conductance of interface between metal and semiconductor has now become a crucial task for the thermal design and management of nano-electronic and micro-electronic devices. The interfacial alignments and electronic characteristics of the interfaces between metal and semiconductor are studied using a first-principles calculation based on hybrid density functional theory. The thermal conductance of interfaces between metal and semiconductor were calculated and analyzed using diffuse mismatch model, acoustic mismatch model and nonequilibrium molecular dynamics methods. Especially, according to nonequilibrium molecular dynamics, the values of thermal conductance were obtained to be 32.55 MW m-2 K-1 and 341.87 MW m-2 K-1 at C-Cu and Si-Cu interfaces, respectively. These results of theoretical simulation calculations are basically consistent with the current experimental data, which indicates that phonon-phonon interaction play a more important role than electron-phonon interaction during heat transport. It may be effective way to improve the interfacial thermal conductance through enhancing the interface coupling strength at the metal-semiconductor interface because the strong interfacial scattering plays a role in suppressing in the weaker interface coupling heterostructure, leading to the lower thermal conductance of interfaces. This could provide a beneficial reference for the design of the Schottky diode and thermal management at the interfaces between metal and semiconductor.